LiveTouch™ Matt | Wood Design
This wood-effect floor looks like it is fresh out of the old mill, limed, washed, and swept, with character that has increased with age. It is further enhanced by the contrasting grains in the classic herringbone pattern on this embossed wood effect floor. All of our Weymount floors come with a 25-year warranty and Weymouth Malted Oak is also available in a matching plank.
This wood-effect floor looks like it is fresh out of the old mill, limed, washed, and swept, with character that has increased with age. It is further enhanced by the contrasting grains in the classic herringbone pattern on this embossed wood effect floor. All of our Weymount floors come with a 25-year warranty and Weymouth Malted Oak is also available in a matching plank.
| Pack Size | 15.5ft² |
|---|---|
| Bevels on Edges | Micro Bevel All 4 Edges |
| Core Material | Natural Mineral / Resin Composite |
| Finish | Deep Emboss Matte |
| Fitting Method | Floated |
| Floor Color | Natural |
| Floor Joint | Easiloc |
| Floor Thickness | 6mm |
| Floor Type | Stratex |
| Hardness | Hard |
| Length | 23 1/2 in |
| Planks per Pack | 20 |
| Tog Rating | .5 |
| Underfloor Heating | Suitable |
| Width | 4 3/4 in |
These are the questions we get asked most often about our floors and their features.
Yes – We recommend you let your Weymouth floor acclimatise for at least 24 hours before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
The surface immediately beneath a Woodpecker floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause Weymouth flooring to distort.
Not in normal living conditions (temperatures of 15-25°C). However, allow a gap of 2-3mm for Weymouth floors where there is likely to be temperature variation beyond normal living conditions. Eg. conservatories
Our cleaning kits for lacquered floors are suitable for your Weymouth floor to keep them shining, alternatively use a well wrung damp mop.
The best way to conceal small scratches and marks on our Weymouth range is with Scratchfix – a quick and easy method to restore scratches on resilient floors.
No – Weymouth floors have built-in underlay therefore additional underlay should not be used. This can create additional bounce which can damage the joints. If you need to raise the height of the floor then we recommend using plywood.
Weymouth is wood-effect flooring and as a result, it is waterproof. It has a stable mineral composite core and a resilient and slip-resistant vinyl.
No – Whilst Weymouth is waterproof, long exposure to continuous water is not recommended, therefore bathrooms are fine but wet rooms would not be suitable.
Yes – You can use this floor with underfloor heating.
This floor has easiloc/click-joints.
This floor should only be floated.
The wear rating for Weymouth is AC4.
Weymouth has a slip resistance of R10.
Weymouth is 6mm thick.
We generally recommend adding at least 10% on top for wastage, however, the plank type, laying pattern and room shape will have an impact on how much wastage is needed so it’s always best to consult with your installer first. Herringbone and chevron floors will typically need 15%-20% wastage.
Select at least 2 products
to compare
